Latest Posts - DIY Hometalk

Pretty Christmas Paper Makes the Most Adorable Tree – Christmas DIY

-

December 9, 2017

Pretty Christmas Paper Makes the Most Adorable Tree – Christmas DIY

Today I gonna show you how you can make an amazing Christmas tree with the help of paper this is most adorable tree every one of your guest like this in your home during holidays.

To make this project, first of all, you will get thick branches of the tree which foot long in my case I use 6 branches of the tree.

To create the paper tree base you can drill the hole in the center of the tree stump.Then you can glue brach of the tree into the wood to twig it.

Now you can Christmas tree shape 50 square of paper and then cut it into the piece in the shape of squares.the largest shape me use is 4.5 to 5″ you can also use it with your own wish.Then cut the paper are smaller and smaller until the last piece is only inch ar a half.

Then fold both squares of paper to measure the exact position of the center of paper that than make a hole in the center of the paper.

Before you can twig the paper.You can add some texture to each piece of the paper.

Then feed the paper onto the branch of the tree in following condition large to a small piece of paper for better shape.

In final step top side of the tree, you can bow the red ribbon to show it’s done.

For your better guidance, i will post the whole tutorial video below you like it and it will help you a lot for your DIY project thanks.

Wooden Nativity Scene Blocks – Christmas DIY

Home Improvement Ideas

admin

-

December 8, 2017

0

Wooden Nativity Scene Blocks – Christmas DIY

Today I gonna show you how you can make an amazing farmhouse primitive nativity scene, Without any cutter.This is very easy and full of DIY.

In the first step, you can print the PDF of Lori white look.

In the second step, you can cut the PDF of every so that black line does not show the PDF of the block.

Now you can cut the block of wood with your own choice but in my case, I can cut 2×4 size block.

Now you can spray the paint on all block to the white color so that every block show the same color.

Now mod podge all the print into the block and wait for the dry or block completely.When you do it so than some line appears on the mod podge.So you don’t worry about this line we will fix it in our next step.

When Mod Podge is dry completely than you can sand the block edge where the print paper meet to block.This step gave out an amazing shape to the block and it doesn’t look then you glue it to the block.

It’s time to antique the block.In my case, I use the dark walnut sand to antique it but you can use black or brown stain to complete the work.

Then you can stack that any way you want to show that in your home.

This was an amazing tutorial you would like it for you better guidance I will post the whole process video on our youtube channel you should like it and support us or if you have any confusion so comment below for your confusion.Thanks

Make Your Own DIY Serving Tray – Christmas DIY

admin

-

December 7, 2017

0

Make Your Own DIY Serving Tray – Christmas DIY

In the whole year we host many of guest with dinner launch and weekly dinner on house but I have 2 to 3 cups on my table so recently me will realize that when some guest come on my home some serve coffee or tea without tray so I realized that that was not got manner for hosting a guest so I started it and finally created DIY try for serving with guest this was very easy and in only few materials I will make it only in one afternoon work.

Materials I used for Make Your Own DIY Serving Tray Project:

Circular Saw.
2x Cabinet Pull.
Tung Oil Finish.
Whitewood Board – you can cut it with your own wish.
Drill.
Drill bits.
Wood Stain.
Router.
Wood Burner.

Now its time to start making the completely DIY serving tray from scratch. First of all, you will have a board to cut it to your own desired size how many long sizes you want it’s your own wish.in my case, I will cut the board without any measurements just cut the board for approximate width. Now making edge fancy you use the router. It will help you a lot for giving a very dashing and amazing shape(look).

Now customize your wood in my case I use for customizing my wood with the help of a circuit machine to make an amazing stencil.you can use anything to create a stencil for your wood you can do any design with you love it your desire to make any design cut vinyl ar pre-made stencil.

In my case, I would trace a world “cheers” now I used a wood burner to burn the wood.

In the final step, you can drill the hole for both sides of the tray for handles of the tray after hole of both of side you can add simple drawer pull to make use this handles.

Last you can shake a bottle of bubbly then serve it with your guest newly create DIY Serving Tray. For your better guidance, I will post the whole project video hope you like it and support our youtube channel. Thankx

DIY Pallet Christmas Card Holder – Christmas DIY

admin

-

December 6, 2017

0

Today I gonna show you how you can make your own Diy Pallet Christmas card holder with the very easy process in step by step you love this whole process.I am also showing you how you can turn this DIY pallet Christmas card holder shape into an amazing Christmas tree.So this project was full of fun now let get start our project

Materials I used for this project:

Staining Pads

Scrap pallet wood

Drill

Tape Measure

Stain

Screws

Circular Saw

First of all, cut the board with your own wish in my case I will use 3 feet, 5 board.

In the second step sketch your Christmas tree with the help tape and measure scale.

In the third step cut wood piece at the angle with the help of a circular saw.

Now it’s the fourth and final step in this step you will screw the wood 2,3 every wood piece.this is me use but you can also use wood glue instead of screwed

For your better guidance, I will post the whole process video I hope this video helps you a lot and also connect to our Youtube channel for more DIY video.

DIY Farmhouse Sign – Christmas DIY

admin

-

December 5, 2017

0

Today I will show you how to make your own Christmas farmhouse sign with only these two thing wood scrap piece and stain only with your hand or your home already.i already seen that many time on Pinterest so I decided to make it my own and share with you so you will be able to make your own DIY Farmhouse sign.

Now cut your wood piece of plywood style to your own wish and your desired size so that its fit to the plywood.

Now paint(stain) your wood piece to whitewash stain.

These materials I use for making my whole project.

Minwax Stain
Gloves
1×2 Piece of Wood
Screws
Drill
Plywood Piece
Staining Pads
Vinyl Decal

Now its final step you will stain the piece of frame with Jacobean Minwax stain.I hope you would like it for your better guidance I will post over whole project video which is given below also subscribe our youtube channel thanks.

How to make DIY Scandinavian Inspired Christmas Sign

admin

-

December 2, 2017

0

If you love painting than this will help you alot.

For the whole process you will need only a board and a paint for writing.

For your better guidance i will post the whole process video which is given in below

How To Make DIY Upcycle Storage Containers

admin

-

December 1, 2017

0

How To Make DIY Upcycle Storage Containers

In my home, I have 3 drawer storage containers. Sometimes we think that how I can see inside the drawer but in other words, we do not do it. So this time we came again with an amazing and easy way to upgrade your old drawer for holidays. So this way you can hide what inside in the drawers.

For that whole process, you will need the following material list which is given below.

You’ll need the following Material:

Drawers which you want to upcycle
Paper of your choice
Regular paper/butcher
pencil
scissors
Ruler
Electrical Tape
Razor blade

I draw a pattern with the help of butcher paper and pencil.

Now I measure the drawer to the top to buttom.the portion bottom half of drawer take more paper than the top side of the drawer.you can also cut your paper with your own wish or your drawer size.

we cut my pattern in this shape you can cut your pattern with your own drawer size.

Then I cut my paper onto the traced pattern to the back.

Now I pulled the back of the drawer to both front and back 1/2 to cover the drawer.

You can use your own wish electric tape but in my case, I will use white electrical tape to cover the whole lines of the two section. Then I will trim some extra contact paper with the help of a blade.

That’s all you finished it I hope you like that for you better guidance I will post the whole project video you may also like this video and subscribe our Youtube channel for more update thanks.

How to Flock a Christmas Tree – Christmas DIY

admin

-

December 1, 2017

0

How to Flock a Christmas Tree – Christmas DIY

A few Years ago I bought some amazing 7.5 foot Christmas tree for $70 in Black Friday All tree was good condition no one was wrong. So this year I wanted a flocked tree for Christmas.what is flocked tree? I thought some of yours don’t know about the flocked tree. So I will tell you what is flocked tree. This is one of the best trees which is a white snowy tree. Someone also offers me also ha good amount of this tree but I don’t satisfy for that so I ignore that. In this year I research something about a snowy white tree. After that, I decided to do something special for myself!

This is how my tree looked like before we will get started with the whole project. I cover the full tree with good fluff in good condition on my garage. In your condition, you will do the same with any place you will like it comfortable for your tree. The place of the tree where it is also neat and clean for inside and outside of it. The image of my tree is given below.

So now we will get started our whole project step by step. The first step is that your tree is not plugged with anything after sure that you will spray down the tree with water. That water removes all dust from your tree and flocks it to the stick tree. Now I used the ladder to start flocking tree to top to bottom. I use this step to flocking the tree but you can use your own wish to flocking the tree. The purpose of spraying is that to flocking the tree and remove it all sifted to the tree.

After I clear and coated many branches of the tree than I also could all tree branches. After could the all tree now I will once again spray the whole tree with water. This all water activates and I love it after there shape come amazingly. Then I need some space to fill that branches etc. Now I will spray the tree with some white paint. Now I will, again and again, spray that many time so that it looks like an amazing sprinkle glitter to the whole of the tree.

Now it is the last steps to the decoration. I hope you will like it for your better instruction I will also post a video which is given below hope its help you a lot and you like and subscribe our channel more Christmas DIY update thanks.

Make DIY Rustic Christmas Wreath – Christmas DIY

admin

-

December 1, 2017

0

Make DIY Rustic Christmas Wreath – Christmas DIY

How amazing and fantastic look like that wreath.

So, first of all, get some wreath fluffing branches. Than tight straightening all of them out. So in the next step, you will place all your branches flocked to the circular motion in wreath.that will show you an amazing color like snow effect.

Next step is that put(Place) all of your rustic reindeer onto the middle. It is too sure that tight and attaches with pipe cleaners.

Now, Its time to fill flocked berries. This is amazing and absolutely make your holiday good.

After applying flocked branches with berries or place focal ornament. Now put your own wish lime green hydrangeas in the shape of a triangle. In my case, I will be placing three green hydrangeas in the shape shown in images and in each hydrangea place burlap ornaments with your own wish.

Now its final some important steps. Fill the piece of ribbon cut with the different length with your own wish. It sure you that placing some curls and loops on the ribbon to show it visually.Amazing you do it it was an amazing wreath with your family to make your holiday season gorgeous. To make all your steps good I will post my video with all steps and interactions in below. I hope it helps you a lot and I make sure you will like and subscribe our Youtube channel for more update and more DIY crafts videos.

DIY Gingerbread House – Using a mason JAR – Christmas Gift IDEA

Kitchen/Bathroom Decor Ideas

admin

-

November 30, 2017

0

DIY Gingerbread House – Using a mason JAR – Christmas Gift IDEA

Gingerbread Jars!

Full up with candy this give you especially Christmas gifts!!!

This is not now a thanksgiving now but I can help you for Christmas which is coming this month.Christmas is just near about two to three weeks.So count down the day which is a Christmas.So be Ready for Christmas to their home.

So now make this amazing gingerbread jars we use tiny mason jars or aluminum foil which is used for roofs.To make this I use the special gingerbreads technique to sure that make which is just for the jars.so now we use windows which are used for decorating.

what are you think I hope you like that and your kids love also it a lot. You can also watch all method video which is given in below.

Materials I used for Make Your Own DIY Serving Tray Project:

Circular Saw.

2x Cabinet Pull.

Tung Oil Finish.

Whitewood Board – you can cut it with your own wish.

Drill.

Drill bits.

Wood Stain.

Router.

Wood Burner.

Materials I used for this project:

You’ll need the following Material:

Drawers which you want to upcycle

Paper of your choice

Regular paper/butcher

pencil

scissors

Ruler

Electrical Tape

Razor blade

Gingerbread Jars!